‘Automotive’ Category

 

Roll On Bed Liners — The Low Cost Option

Roll on bed liners are the do-it-yourself way to a better looking truck bed and improved bed protection too. We have lived with a do-it-yourself bed liner for about three years now and here’s what it took to get the liner on.

The Tools and Materials For A Bedliner

The easiest way to get going is to just get a kit. Herculiner is the leading brand with a kit, but now other liner paint companies offer the one stop material solution.

You’ll need the paint for starters. Plan on at least 5 quarts for a full-size truck bed. The more the better. That makes sense when you realize that professional liners consist of about 5 gallons of paint. That’s 5 gallons, not just 5 quarts. So, don’t be satisfied with just a gallon of bed liner paint.

You’ need an applicator, preferably a roller and some cheap brushes. Don’t worry. As the paint dries, it settles and the roller or brush marks just fade away.

Cleaner is a must, but a simple solution is to just get regular automotive grease and wax remover. That’s really the cleaning problem, getting rid of wax and grease.

Then you’ll need masking tape, quite a lot really. You do not want bed liner paint anywhere except where it should be. It’s so sticky, it’s hard to clean it off once it’s where it shouldn’t be.

Finally, don’t forget the sanding material. That can be sanding paper or it can be abrasive pads. In any case, get plenty to get the job done.

Getting Started Right

Clean surfaces are key to paint that sticks. Getting rid of the old wax and grease is a must to get a coat that sticks. Don’t even think about sanding before cleaning. If you do, you drive the wax or grease into the paint. The sanding doesn’t get rid of it. That’s a sure road to peeling paint. So clean first or else.

Acetone is the right solvent, but it’s easy to get as a automotive wax and grease remover.

Sanding For Success

Applying bed liner paint isn’t the place for fine sanding. It’s the place for very aggressive abrasives. See, what you want is a really rough scratched up surface. That’s what helps the paint stick, a really rough surface prep. No fine sanding is required or desired.

Application

After the truck bed is clean and sanded, the hard part is done. Actually putting on paint couldn’t be easier. Partly because the liner paint is so sticky and so thick. It just levels out and sticks almost like a gel coat. You just roll it on and stand back. The paint levels out as it dries and all the roller and brush marks just fade away. It’s easy as pie.

Good And Bad

Applying bed liner paint yourself is a fast way to get a spray-on bed liner look-alike for just a fraction of the cost of a professional model. It really looks almost just like a professional liner but at just a fraction of the cost.

The liner we put on as stood up to hard use for about three years. The bed looks good still, though before lining it was rusty and in sad shape. It is scratched and scarred from use but looks good especially from a few feet away. Here’s what to watch for if you choose this route.

There’s more to this than just rolling on paint. The preparation is the tough part. Do it right or waste your time.

A coating you put on yourself isn’t nearly as durable as a professional spray on liner. That’s mostly because it just isn’t as thick. The professional liner just consists of much more material.

Especially for older pickups with existing bed paint damage, a roll on bed liner makes perfect sense. After living with a roll on coating for three years, I say it’s worth the trouble if you want a cheap bed coating.

 
 
 

How You Can Be Among The 20% Of Automotive Dealerships Who Survive The Current Economic Crisis

For most dealerships, times are hard. The leads have slowed down, the obstacles of financing should qualify as an Olympic sport and advertising just doesnt work like it used to.

And the truth is that many dealers are going under. Theres going to be a lot of casualties after this one.your store included.

OR maybe not.

This current financial crisis may really be your best blessing as a small business owner.

Sounds crazy, however heres the deal.

Many dealers are going out of business. No doubt. Its already happening. Your job is to be sure its somebody elses business going under not yours. And there are very real ways to do this, if youre really serious about being among the 20% of dealers who will survive the storm.

Im going to give you some cold, hard stats and ways to aid you in simply a moment, but let me begin by saying that if you dont have the correct systems or processes in place, work them out now. If you have personality conflicts, deal with them today. If you dont have a system for staying in touch with past customers and unconverted leads, get one.

If you dont have a crystal clear answer to the query, “Why should somebody choose me over other dealers?” figure it out this weekend. If you dont have a predictable way to get new clients into the door, at will, now is the time to do something about it. If you have floor plan issues or problems with your lenders, it’s better to sort it out this month than next.

Why?

It all comes back to the timeless 80/20 rule, also known as the Pareto Principle.

If youre not acquainted with the Pareto Principle, this rule dictates that 20% of dealerships naturally get 80% of the business. In different words, the 20% of dealers who can survive this current economic storm will do so because they make 16 times as much as those in the 80%.

And because of this capability to earn additional capital, when the market does come back (which it invariably will), theyll be larger and higher than ever, readily positioned to eat up new shares of the auto market.

That may mean more dealers go out of business once more-but it wont affect you if youre among the 20%.

So what can you do to make sure your dealership quickly and easily ends up among the 20% if youre already in, or teetering towards the 80% category?

Well heres what dealers in the 20% group do, and what youll need to do if you plan to survive:

1. Theyre sharpening their axe to make sure the dealership runs smoothly
2. Theyre going through extra lengths to make sure the staff is well skilled
3. Theyre getting a dense hold on the marketing engine that will drive their business over the following few years

And most importantly, they wont panic or talk themselves into defeat. They know individuals will still buy cars. Just not as many. They also know theres going to be less deals to go around and theyll do what it takes to safeguard that business.

Now, what happens if things get real unhealthy, and unemployment rises to 15% or a lot more? Well if youre in the 80%, you’ll be forced to lay off and you wont have the required sustain employees to run your store.

BUT, if youre in the 20%, 15% unemployment rates mean youll have the pick of the litter of who you would like to work at your store. It means that youll have the cash to dismiss your deadbeats and riff-raff and be ready to replace them with competent, skilled, hard working folks in an instant.

Therefore high unemployment rates can be a good thingif youre in the right group.

The 20% group will see these hard times as an opportunity.

Smart people (those in the 20%) know that now, and the months ahead are prime time to invest in stock, real estate, human capital, marketing, inventory — and theyll be the ones who really rake it in when the market comes back.

Thus where can you fall as it relates to the 80/20 rule?

Heres something else that we know for sure

1. 80% of the individuals reading this can create solely 20% of the results they have to be successful (harsh, however true)
2. But 20% of the dealers reading can create 80% or more of the results they need to make itand make it huge!

A small percentage of the dealers reading this right now are prepared to make marvelous progresses in the coming months, whereas the rest are destined to mediocrity.

Now here’s where things get really crucial. The eighty/twenty rule repeats itself, infinitely. Which means the top 20% splits itself into eighty/twenty. Thus theres the top 4%.

Then it happens again. 20% of the top 20% of the top 20% — the top 0.8%. Thats where you really need to be. If we didnt already challenge you enough to be within the top twentyif you REALLY want to come out ahead, try to become a top 0.8% person.

Let’s take a closer look at the .8% person:

Each decision is carefully made by a 0.8% person because its way more important than a decision made by an 80% person.

A 0.8% person knows a way to focus and slim their labors on those things that are actually crucial. Even though he might have a list of 43 things to do, hell hone in on the three or four that are more important than all the others combined. But the 80% people treat all things as if theyre the same, or worse, work on the forty less crucial tasks before they tackle the three or 4 that really matter! They have no sense of priority and hence they “busy work” themselves out of survival.

The 0.8% person carefully discriminates what information he will allow into his mindwhat he reads, listens to, or watches on TV who he surrounds himself with. The 80% people are “open minded” and “tolerant” to just about anyone or any idea.

The 0.8% people belongs to some kind of mastermind or “good ol boys” club. This can be the sort of group that can support, hold up, and go the extra mile for its members. And most of the 0.8% folks pay BIG money to be in these clubs! However again, unlike the 80% who would see it as a waste, they understand the worth and that some of the most brilliant men of all time, (i.e. Carnegie, Henry Ford, Ben Franklin) all participated in the same.

The 0.8% person is perfectly immune to disapproval from othersdoesnt care what most folks think is not affected by pessimism on the news, from neighbors or family members. He realizes that the mass of humanity is nearly always pathetically wrong. The 80% folkswell, theyre the masses.

So, friend, whats it gonna be for you? 80%, 20%, 4%, 0.8%? Your actions now will finally determine your fate of your future. So choose the winning team and start down the road to success-even in these tough financial times!

 
 
 

Build your garage’s reputation on the quality of your automotive lift service

There are many procedures to follow and many different tools to use when inspecting or repairing an automobile. Doing a thorough job of inspecting and repairing a vehicle requires more than just looking under the hood. Of course, anyone who works in automotive repair knows this. And they know that providing an automotive lift service is one of the most important parts of servicing a vehicle. Incorporating an auto lift repair & service is the best way to ensure a vehicle is properly inspected and thoroughly restored.

If you want to build a reputation as providing the highest quality automotive repair, then you must have an auto lift repair and service that is second-to-none. The best way to ensure your mechanics are able to examine, diagnose, and repair vehicles in a safe and timely manner is to have an automotive lift service. The days of automotive repairman sliding under a vehicle with raggedy sliding boards are over. In the 21st century people want to see a repair service that uses state-of-the-art equipment.

To be sure, you may already offer an automotive lift service; but the question you must ask yourself is, is it good enough? Technological advances are being made all the time in the equipment used in an automotive lift service. You don’t want to be left behind. In order to remain competitive you need to have the tools and equipment that will allow you to enhance the value of your auto lift repair and service. This can only be done by investing in the best equipment available.

Indeed, it is important to remember that automotive lift service equipment is an investment just like any other you’ve made or plan on making to grow your business. Your auto repair service can only grow on the strength of its reputation and an increase in the number of new customers you attract. An automotive lift service may seem like a minor thing, but it can mean all the difference between a vehicle that has been properly looked at and repaired, with a full view of all the various parts, gears, and combinations under the vehicle, and one that has only been briefly scanned and not thoroughly serviced. A repair shop in which vehicles are fixed in the first instance tends to do much better than one in which drivers have to return again and again because of the same problem.

Fortunately, finding the best in equipment for an automotive lift service is not that difficult. And the place to begin your search is on the worldwide web. The web gives you the ability to bring many of the vendors selling this kind of equipment to you. This will give you to opportunity to compare the price and value of the many firms offering this kind of equipment. Using the web will also enable you to find out the reputation of a firm. The best predictor of future performance is past performance. And the firm with a proven record of delivering high customer satisfaction is the one most likely to meet your needs and expectations.

 
 
 

Automotive Repair Princeton Mn 5 Car Service Tips To Maintain Your Cool

If youre finally getting ready to take that long-awaited vacation during the last few weeks of summer, you probably dont want to spend it being towed to a strange town for a car repair, or even stranded on the side of the road waiting for help. This situation usually means more than just a car repair bill. It can involve towing charges, lodging, rental car, extra phone calls, meals, and the general inconvenience of missed reservations. An unexpected automotive repair not only becomes expensive, but it can bring an abrupt end to vacation plans. This scenario could possibly have been avoided by a pre-vacation car service before leaving home.
So you can enjoy the last few weeks of summer, here are 5 ways to maintain your car, and your cool!

1. Cooling System // Coolant can top 200 degrees. Have it inspected and serviced at the recommended car service intervals.
2. Air Conditioning System // Your A/C works hard in the summer heat, so have it inspected and serviced by certified technicians to make sure its working properly.
3. Battery // Excessive heat can take its toll on your battery and charging system. Clean off any corrosion from the battery terminals and connections and have the battery and charging system tested to be sure its ready for those last hot days of summer.
4. Tires // Hot weather and long road trips mean added stress on your tires. Be sure to check the air pressure and tread wear on a regular basis.
5. Oil & Filter // Dirty oil, or low oil level can lead to more costly repairs. For proper cooling and lubrication, change your oil and filter regularly.

Not only can a pre-trip car service reduce the chance of costly and possibly dangerous road trouble, it also provides an opportunity to have your car repair made at home by an auto mechanic who is familiar with your car. While no inspection can guarantee a vehicles performance, you will gain peace of mind knowing you took the proper precautions for the safety of your family.

So that you feel confident starting down the road, have a car service performed by a qualified auto mechanic. Contact the ASE-Certified Technicians today by calling (763) 389-3811, or go on-line at http://www.rumriverauto.com/ for more information about automotive repair. Since 1997, our auto shop Princeton MN has served customers in the surrounding areas with automotive repair Milaca and automotive repair Zimmerman, Minnesota.

 
 
 

Are Rubber Floor Mats Better Than Carpet Floor Mats

Regardless if you have just recently purchased a new car or are looking to spruce up your old vehicle, adding floor mats can make all the difference. Whether you are purchasing floor mats from a car dealership or a automotive shop, the options are usually large and may be confusing. Generally, there are two main categories of floor mats: rubber floor mats and carper floor mats. When making a decision between the two materials, the choice is generally one of desired look and specific needs.

Rubber floor mats are the better choice for vehicles that do a great deal of hauling materials or people. Look to include rubber floor mats in truck beds or in the rear of vehicles and in trunks. In addition to being much easier to clean than their carpet cousins, rubber floor mats may offer a bit of skid protection, so that items you are hauling are not catapulted from one end of your vehicle to another. Also, if you live in an area of the country that experiences particular messy weather or have a great deal of mud around your home or place of business, you may want to consider rubber floor mats specifically for the clean up potential.

Carpet floors mats are generally designated for cars, although there is no one reason why carpet must be included in cars and vice versa. Generally, carpet floor mats are though to look better, and are often purchased directly from the dealership in a color that matches the interior carpeting of the vehicle. If you purchase carpet floor mats from an automotive store or an outside source other than a dealership, you may have potential problems in matching the color of the floor mat to the color of your interior. In this instance, consider using a coordinating color that will hide stains and clean up easily while looking nice with the interior of your car.

Although carpet floor mats are usually purchased for vehicles designed for transportation instead of hauling purposes, many individuals find them inappropriate. Especially if you have small children or pets, carpet floor mats can become easily dirty and stained with muddy feet or spills. For this reason, consider mats that are topped with a stain protective coating so that spills and liquids puddle on the surface instead of soaking through the mat. Although floor mats are generally the line of protection for the carpet underneath, very few individuals ever let this carpet show and they often look for clear protective vinyl or rubber mats to protect their floor mats. Keep in mind that any floor mat should be secured to the floor to prevent slipping upon entering or exiting the vehicle, especially if the mat is located under the driver’s seat.

Consider using rubber floor mats for their customization options, since many individuals want to create a look especially for their car. These customizations can be anything from a name or nickname emblazoned on the floor mat to a cartoon character or a favorite sports athlete’s number. With the booming customization business involving vehicles of all makes, shapes, and sizes, it is not surprising the customized floor mats have also become a trendy extra for vehicles.

In the end, the choice of rubber or carpet floor mats is completely up to you. Consider first your purposes of the vehicle and then your budget to determine which type of mat will best meet your needs. If budget is a main concern in your choice, turn to the World Wide Web, where you can often find great prices on popular styles and brands of floor mats.

 
 
 

Multiple Motorcycle Saddle Bags

Motorcycle Saddlebags consist of a variety of styles, shapes, sizes and materials. Saddlebags are mounted behind the seat and so on each side for the rear wheel on the motorcycle, some are even merely laid about the motorcycle seat. The best commonly known bag incorporates leather and he has buckles and tassels but there are lots of more types accessible for motorcyclists.

In addition saddlebags satisfy the requirements of safely storing items for travel around the motorcycle, he or she can also add style for the bike. Each of the most commonly encountered materials utilized for making saddlebags are leather and nylon. The leather saddlebags quite often have buckles, snaps or zippers and definitely will sometimes have extra flair such as tassels, embroidery or braided leather. Flames are in all probability will show you common addition to saddlebags since flames are usually entirely on motorcycles themselves. Some of these bags can be bought around $70-$100.00.

The nylon saddlebags can be bought for any slightly bit less. Although they are likely significantly less stylish being the leather bags, these are a great buy for the money and magnificence are usually put into the bag. They could don’t have the tassels, snaps and buckles just like the leather bags nonetheless they can nonetheless be personalized. The nylon bags may be embroidered to supply some style. These bags commonly have zippers and possibly snaps to secure items for safe travel.

They are sometimes manufactured from hard plastic, which have been obviously one way to protect and carry items on a trip using a motorcycle. Most bags are black however hardcover box style saddlebags are traded in additional colors. Bring forth high bags manufactured out of plastic there’re custom-made together with the rider’s name, initials or decorative art. These kind of bags will have decals included on them which could deemed a very approach to decorate them.

 
 
 

Customized Motorcycle Helmets

If you are into motorcycles then its not surprising that youll be looking for the right motorcycle helmets. Of course, most of us want to have our own unique and catchy design of helmets where it will make you stand out among the others. In the market there is a wide assortment of styles and deigns of helmets that you can choose from. It varies from the simplest designs and styles up to the most extreme image that you can think of. There are also many simple and plain styles of motorcycle helmets that dont even have any printed designs.

But if you want to stand out and be noticed by the crowed with the uniqueness of your helmet, you need to be very creative. Yes, creative, because the good news about motorcycle helmets, you can actually customize your own personal design. There are shops that offer this kind of service. All you have to do is to show them your own design and give them instructions on how you want it done. Then, maybe they would also throw in some additional ideas. Just make sure that they understand the things that you want to happen, so you wont get disappointed when its done. For sure they have the best design for motorcycle helmets.

Or, if you cant think of any designs, try to ask that shop if they have sample photos of their designs, so you can choose from there instead. Another area that you can check for designs is the internet. You wont get disappointed since it has all the possible designs that you may want for your motorcycle helmet. When you open your computer to images and it will show you numerous assortments of helmet designs. You can choose from those photos, have them printed out and bring it with you.

 
 
 

Basic Tools Needed To Paint Your Chopper Motorcycle

PROFESSIONAL AIR BRUSH KIT

Professional air brush kit is the most basic tool which is required to paint a chopper motorcycle. It sprays enamels lacquers inks and other liquids, which operate on fifteen to fifty pounds per square inch pressure. It is an internal combine air brush with twin action trigger, which gives only single finger control of air-flow and pattern width. To assure more uniform coverage, an internal combine air brush is used. By using it, you can paint each and every part of your chopper motorcycles as its pattern adjusts from fine line 1/16 inches to broad 1-1/2 inches. It can easily used with the help of compressor or carbon dioxide tank. Air brush with 1/4 – oz. ink (paint) jar, one 2 – oz. jar and two 3/4 – oz. ink (paint) jars with covers, for detail work one ink (paint) tip is also included in professional air brush kit.

PAINT STRIPING TOOL

Paint striping tool is used to paint the edges of a chopper motorcycle. With the help of paint striping tool, you can easily paints a single line or two parallel lines at same time. It can also be used to make latest and hottest designs on your chopper motorcycle. Making your own custom designs can be proved very valuable as it is different from the various designs which are easily available in the market. Six striping wheels (two 1/16 inches two 1/32 inches one 3/32 inches and one 1/4 inches), four spacers (two 1/16 inches one 1-32 inches and one 3/32 inches), additional washer, storage tray, two 1/2 – oz. jars, instructions and idea booklet are also included in this tool kit.

GRAVITY FEED AIR SPRAY GUN

Gravity feed air spray gun is very fast as compared to any other spray gun available in the market. Gravity feed air spray gun kit is the best spray gun as it includes additional nozzle, air cap, and separate needle sets. For more efficient ink (paint) flow, better control and easier maneuvering overhead cup is included in the kit. The removable air regulator is used to controls the air pressure and allows the user to use the ink (paint) of any thickness. It also maintains the desired pressure and it is unaffected by the power the compressor. Spray pattern (from flat to round) and material flow of ink (paint) are adjusted by inbuilt regulators. Its weighs is less than 2-1/2 pounds with air regulator. It has external supply gun which has die-cast aluminum body with trigger control 1.4 millimeter and stainless steel nozzle and ink (paint) tip. It has non drip 20 – oz. plastic jar with cap above gun that allows the user for more accurate control and assures an excellent job even when using just a small amount of ink (paint). It also includes tool set and choke strainer. Its working pressure is fifteen to fifty pounds per square inch pressure.

SPRAY PAINT RESPIRATOR

Spray paint respirator is one of the important equipment required to paint a chopper motorcycle. Spray paint respirator is a plastic face cover that protects your mouth, eyes etc form the paint that you are using.

TOOLS AND REPAIR KIT

Tools and Repair kit contains all the basic tools kit you required to dismantle or to assemble your chopper motorcycle.

These types of tools kit contain tools like hammer, screw driver, nails, sandpaper, share blades, dent puller and many other basic tools to fulfill your requirement. There are various types of sandpaper (rough sandpaper, fine sandpaper etc.) are also included in these tool kits.

BUFFING KIT

Buffing Kit is used to shine the metals like stainless steel, aluminum, gold, silver, zinc etc. Buffing Kit can be used with six inches bench grinder or with any electric motor with 1/2 inches to 5/8 inches. You can also use buffing kit with 1/4 inches or 3/8 inches drill machine. But these types of drill machines are not included in the buffing kit. It can play a very important role during the sanding and polishing process of the motorcycle.

 
 
 

Hyundai Santro Xing – Small Hatchback Automobile

The Hyundai Santro was launched in the year 1998. The car received a combined, unpredicted response particularly from the Indian market. After a couple of years, the brand new upgraded model of Santro was introduced out there, Santro Xing. This small hatchback automobile has many opponents, particularly within the Indian market such as Maruti Wagon R, Chevrolet Spark and Maruti Zen. The automotive is available is eight different colors, white, silver, beige, darkish gray, black, two shades of purple and blue. Talking first concerning the exterior seems to be, the general look the automotive gives is quite sober. With its giant entrance head lamps, which offer clear imaginative and prescient and physique colored front grille, black bumper and lengthy air dam all provide a decent look along with nice performance benefits to the car. The body colored bumper gives the automobile a very sporty look. The rear view mirrors and the door handles are all in black coloration which provides the car a really conventional and standard look.

The again of the automobile is as sober and stylish as the front of the car. The car has an elongated yet proportional again lights and boot. There is a spoiler behind the car, which not solely makes the car look incredibly gorgeous but also provides it with amazing aerodynamic stability. The rear lights are very elongated that not solely provides to the model of the car but additionally informs the autos behind it of the automotives future moves. There may be also a body colored bumper behind the automobile which continues the uniformity in design of the car. The back window is tinted without any wiper.

Now coming to the inside of the Hyundai Santro, the inside of the automotive comes in two toned colors, brown and beige, each contrasting, yet complimenting colors. Moreover, the seat upholstery can be two toned which supplies an overall complimenting effect. The cabin of this small automobile was redesigned to enhance it within the Santro Xing. The instrumental field which reveals the gas and temperature dials along with the speedometer and tachometer are within the traditional white shade with pink needles, which seems very decent. Nonetheless, one drawback of this type of meters is that, they can be tough to learn because of the similar colors in all of them. The new Santro has redesigned AC vents which have been given an extra modern look. Furthermore, the newly added stereo system has blue illumination which has a silver finish provides it a really refreshing look. The steering wheel is digital which saves a whole lot of effort and offers ease of driving. The newly inbuilt stereo system has aux and USB ports, all built-in to supply up to date technology. The Santro has been made to accommodate 5 passengers very comfortably, and with its upright rear position, there may be ample house for baggage within the trunk as well. Furthermore, there may be enough leg room and headspace for the entire passengers, do not be fooled by its small shape. The car will match sufficient people simply as any massive car will.